Dynomotion

Group: DynoMotion Message: 14495 From: jerrybiehler Date: 3/17/2017
Subject: Spindle enable issue

So, got a kind of weird issue with Mach and the kflop. Cold boot kflop and launch mach. I can jog x, y, and z just fine. Set a speed and a M3 or M4 and nothing. Look at the console and it is getting the messages from Mach. Go to the step/response screen and use the step button to jog the spindle, it moves. Go back to Mach and the spindle works as it should as long as I dont power down the kflop. 


I am guessing I am missing something in the c programs that enables the spindle axis, but I am not sure what. Here are my files I use with Mach:


https://drive.google.com/open?id=0B1bUBQ6DCEwMTTVBQy1OYUROWGs
Group: DynoMotion Message: 14496 From: Tom Kerekes Date: 3/17/2017
Subject: Re: Spindle enable issue
You are correct. Your Initialization program doesn't enable axis #3
Add a statement of

EnableAxisDest(3,0);

after Axis #3 has been configured like your other axes have. 

Regards
TK

On Mar 17, 2017, at 12:43 AM, jerry.biehler@... [DynoMotion] <DynoMotion@yahoogroups.com> wrote:

 

So, got a kind of weird issue with Mach and the kflop. Cold boot kflop and launch mach. I can jog x, y, and z just fine. Set a speed and a M3 or M4 and nothing. Look at the console and it is getting the messages from Mach. Go to the step/response screen and use the step button to jog the spindle, it moves. Go back to Mach and the spindle works as it should as long as I dont power down the kflop. 


I am guessing I am missing something in the c programs that enables the spindle axis, but I am not sure what. Here are my files I use with Mach:


https://drive.google.com/open?id=0B1bUBQ6DCEwMTTVBQy1OYUROWGs
Group: DynoMotion Message: 14501 From: jerrybiehler Date: 3/17/2017
Subject: Re: Spindle enable issue
Yup, that fixed it, thanks.

-Jerry